Lectrosonics SPNTWB Bedienungsanleitung PDF herunterladen (Seite 18)

SPNTWB

LECTROSONICS, INC.

Using the LCD

The LCD can be used to check current settings or make

adjustments without using a computer interface.

Boot Screen

Main Window

The LCD will

show the mode,

the position and

total number

of units in the

stack.

Shown here is

the Master as

unit 1 of 2.

Navigation Control

The navigation control for the LCD consists of a rotary

control and four directional buttons for selection of

menu items and to enter values. The four outer buttons

are referenced as LEFT, RIGHT, UP and DOWN. Press-

ing the center of the rotary control provides a “select” or

“center switch” function.

Press both Left and Right buttons to

turn the LCD backlight OFF and ON

Center Switch

The LEFT functions as a BACK button to return to the

previous menu from setup screens as prompted by the

symbol in the lower left corner of the LCD.

Shortcut Buttons

• LCDBacklightToggle:Press both the LEFT and

RIGHT buttons to turn the backlight on and off.

• EmergencyMute(panicbutton):Pressing the UP

and DOWN buttons together will mute all outputs to

remedy situations such as runaway feedback.

• RestoreDefaultSettings(MasterReset):Hold in

the LEFT and UP buttons while turning on the power

to restore the factory default settings. The Alert LED

will glow white during the process, which takes about

75 seconds to complete.

Panel Lock/Unlock

From the Main Window, use the rotary control to select

SYS in the lower row window and press the center

switch. Then scroll down with the rotary control to the

menu item named Front Panel Lock and press the cen-

ter switch to enter the setup screen.

Select the Unlocked/Locked item with the rotary control,

press the center switch.

A prompt will appear asking you to enter the passcode.

The factory default passcode is ﬁve presses of the cen-

ter switch. Once the correct passcode is entered, the

panel will allow access to the screen items to change

the unlocked/locked status, enter a new passcode and

save the results.

The passcode can consist of any combination of ﬁve

successive button presses of the four outer switches

and the center switch such as: LEFT > RIGHT > UP >

DOWN > CENTER.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24

Kommentare zu diesen Handbüchern

Keine Kommentare

Lectrosonics SPNTWB Bedienungsanleitung Seite 18

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Audio-Zubehör Lectrosonics SPNTWB