Lectrosonics HM Bedienungsanleitung PDF herunterladen (Seite 15)

Digital Hybrid

Plug-On Transmitter

Rio Rancho, NM

SYMPTOM POSSIBLE CAUSE

HISS AND NOISE -- AUDIBLE DROPOUTS 1) Transmitter gain (audio level) far too low.

2) Receiver antenna missing or obstructed.

3) Operating range too great.

4) Signal interference. Turn off transmitter. If receiver’s signal

strength indicator does not drop to nearly zero, this indicates an

interfering signal may be the problem.

Use a clear operating frequency.

“Loc” APPEARS IN DISPLAY WHEN ANY BUTTON IS PRESSED

1)ControlPanelislocked.(SeeOperating Instructions, Locking

and Unlocking the Control Panel.)

“Hold” APPEARS IN DISPLAY WHEN ARROW BUTTONS ARE PRESSED

Reminder that it is necessary to hold down the AUDIO or FREQ

button to make adjustments to the audio gain or frequency settings.

“PLL” APPEARS IN DISPLAY Indication that the PLL is not locked. This is a serious condition

that requires factory repair. It may be possible to operate on

another frequency far removed from the one that was selected

when the unlocked condition was indicated.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20

Keine Kommentare

Lectrosonics HM Bedienungsanleitung Seite 15